EasyManua.ls Logo

BLUEBOT EZ1 - Charging Station Placement and Docking

BLUEBOT EZ1
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
NOTE
• Please do not move the charging station without reason and keep it
out of direct sunlight.
• If the charging station is relocated, the robot may fail in positioning.
• Direct sunlight will interfere with the recharging signal and consequently,
the robot may be unable to return to the charging station.
• The robot cannot be used to remove liquids.
• If the battery level is less than 20% the robot will not work. Please
charge it.
• The robot will return to the charging station automatically if the
battery level is less than 20% when in use and will be powered off.
• Please clear various wires (including the power line of the charging
station
) from the ground before use to avoid outage and damage of
objects or wires when wires are dragged by the robot.
INSTAllATIoN INSTrUcTIoN | roboT & cHArGING STATIoN
0,5m
1,5m
0,5m