13
Bluelab Probe Care - pH
The instrument is only as accurate as
the probe is clean!
Bluelab pH Probe KCl Storage
Solution
The perfect solution to store and hydrate
your Bluelab pH products.
Probe cleaning is one of the most
important parts of owning and operating
any Bluelab meter, monitor or controller.
If the probe is contaminated (dirty) it affects
the accuracy of the reading displayed.
Bluelab pH Probe KCl Storage Solution is designed
to increase response time and maximize the life of
Bluelab pH pens and pH probes.
For best results, use the KCl solution to store the pH pen/
probe after use and hydrate monthly.
Instructions are on the label of the bottle.
› Bluelab pH Pen
› Bluelab Soil pH Pen
› Bluelab pH Probes
› Bluelab Soil pH Probes
Use Bluelab pH Probe KCl Storage Solution with:
Bluelab Soil pH Probe replacement
The Bluelab pH Probe is the only part of the Bluelab
Soil pH Meter that requires replacing.
Soil pH probes do not last forever. They age
through normal use and will eventually fail.
To ensure you receive a long life from your soil
pH probe, please read the instructions provided
with it.
When the time comes to replace your Bluelab
Soil pH Probe all you have to do is order a
replacement from your supplier!
› Probe care instructions
› 3 x plastic cups
› 20ml single-use Bluelab Solution
Sachets, 2 each of: pH 7.0 & pH 4.0, KCl
› Bluelab pH Probe Cleaner
› Toothbrush (pH probe cleaning
instrument)
Bluelab Probe Care Kit - pH contains:
To Next Page
Loading...
