INSTALLATION INSTRUCTIONS
The appliance shall not be installed in the laundry.
Installation of indoor unit
●
●
●
●
Such a place where cool air can be distributed
Such a place where condensation water is easily
Such a place that can handle the weight of indoor unit.
Such a place which has easy access for maintenance.
drained out.
throughout the room.
SELECTION OF INSTALLATION LOCATION.
Each type is similar to the other as follows;
●
●
THERE ARE 2 STYLES OF INSTALLATION.
CEILING TYPE
FLOOR TYPE
Schematic drawing of hooks:
Where there is too much of oil area.
Where it is acid base area.
●
●
CAUTIONS FOR INSTALLATION WHERE AIR
CONDITIONER TROUBLEIS LIABLE TO OCCUR.
7.87 in
Indoor unit
The indoor unit should be sited in a place where:
1) the restrictions on installation specified in the indoor
unit installation drawings are met.
2) both air intake and exhaust have clear paths met.
3) the unit is not in the path of direct sunlight.
4) the unit is away from the source of heat or steam.
5) there is no source of machine oil vapor (this may shorten indoor unit life).
6) cool (warm) air is circulated throughout the room.
7) the unit is away from electronic ignition type fluorescent lamps
(inverter or rapid start type) as they may shorten the remote
controller range.
8) the unit is at least 3.3 feet away from any television or radio
set(unit may cause interference with the picture or sound).
●
Where there is irregular electrical supply.
Indo
or Unit Installation Drawings
Theindoorunitmaybemountedinanyofthethreestylesshownhere.
Exposed
Floor lnstallation Wall Installation
Molding
Mounting plate
Half conceated
Concealed
Grid(field supply)
Location for securing the installation panel.
27.55
4.72
8.66
6.69
1.18
25.35
4.72
8.66
6.29
1.18
22.44
23.62
7.87
59 in
or more
59 in
5.9 in or below
from the floor
59 in
or more
59 in
or more
or more
14
INSTALLATION
PAPER PLANK
To Next Page
Loading...
