EasyManua.ls Logo

Bluetti AC70 - Car Charging; Generator Charging

Bluetti AC70
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.3 Car Charging
Connect the AC70 to the vehicle's 12V / 24V cigarette lighter port via the car charging
cable. The AC70 also automatically stops charging when it's fully charged. On average, it
takes about 7-9 hours to refill the AC70 using a 12V port and 4-5 hours with a 24V port at
an ambient temperature of 25℃ (77 ℉).
Note: Make sure your vehicle meets the following conditions for charging:
The vehicle is capable of supplying power.
The vehicle's engine is running during the charging process.
6.4 Generator Charging
Connect the AC70 to a generator via the AC charging cable. Under optimal conditions, it
takes approximately 2 hours to reach a full charge at an ambient temperature of 25℃ (77 ℉).
Note: Make sure your generator meets the following conditions for charging:
The generator boasts a stable power output that exceeds the charging requirement of
the AC70.
The generator delivers a pure sine wave AC output with voltage and frequency that
meet AC70's specifications.
For stable and efficient charging, avoid using unreliable power sources like wind
turbines. Also, it's not recommended to run your devices with AC70 while it's charging
with a generator.
JUST POWER ON 15

Related product manuals