What to do for over-voltage protection (battery pack) in Bluetti Portable Generator?
If your Bluetti Portable Generator is showing an over-voltage protection error for the battery pack, stop charging it and start discharging.
What to do if Bluetti EB240 has under-temperature protection when charging the battery?
If your Bluetti Portable Generator shows under-temperature protection when charging the battery, wait for a while for it to heat up and then restart the machine.
How to fix over-voltage protection (PV input) on Bluetti EB240?
If your Bluetti Portable Generator displays an over-voltage protection error related to the PV input, disconnect the solar charging cable and then restart the machine.
What to do if Bluetti Portable Generator shows charging protection of battery protection board?
If your Bluetti Portable Generator shows a charging protection error from the battery protection board, wait for the temperature to return to an acceptable level and then start charging.
What to do if the temperature of the heat sink for PV module is not detected in Bluetti EB240?
If the temperature of the heat sink for the PV module is not detected in your Bluetti Portable Generator, restart the machine.
What to do if Bluetti Portable Generator shows under-temperature protection when charging the battery?
If your Bluetti Portable Generator shows under-temperature protection when charging the battery, wait for a while for it to heat up and then restart the machine.
What to do if Bluetti EB240 Portable Generator shows under-voltage protection for the 2nd cell?
If your Bluetti Portable Generator indicates under-voltage protection for the 2nd cell, charge the product in time and restart it when fully charged.
What to do if Bluetti EB240 Portable Generator shows under-voltage protection for the 1st cell?
If your Bluetti Portable Generator indicates under-voltage protection for the 1st cell, charge the product in time and restart it when fully charged.
What to do for battery failure on Bluetti Portable Generator?
If your Bluetti Portable Generator indicates a battery failure, restart the machine and charge it.
How to fix battery protection on Bluetti Portable Generator?
If your Bluetti Portable Generator is experiencing battery protection, disconnect the solar charging cable and restart the machine.
Explains the meaning of charging power, DC/AC ON/OFF status, and battery status indicator on the screen.
Provides essential warnings regarding reading the manual, using warning labels, avoiding water, heat sources, and unauthorized modifications.
Provides key operational advice on environment requirements, air inlet/outlet, powering off when idle, and full charging for long periods.
Provides a table of error codes (E001-E004) and their corresponding problems and solutions, covering protections and failures.
Lists additional error codes (E005-E019) and their solutions, focusing on temperature, voltage, and inverter faults.
Details further error codes (E020-E023) and solutions related to temperature detection, charging, and power protection.
Details specifications for continuous output voltage, rated frequency, power, power factor, THDV, overload protection, and efficiency.
Details battery specifications like voltage, capacity, cell type, packing, IP rating, operating environment, dimensions, and net weight.
General| Battery Capacity | 2400Wh |
|---|---|
| Battery Type | LiFePO4 |
| Rated Power | 1000W |
| Surge Power | 1200W |
| Cycle Life | 2500+ cycles to 80% capacity |
| AC Output Voltage | 110V |
| AC Output Frequency | 60Hz |
| Car Port Output | 12V/9A |
| USB Output | 4 x USB-A (5V/3A) |
| DC Output | 12V/9A |
| Weight | 22 kg (48.5 lbs) |
| Solar Input | 16-60V/ 10A, Max.500W |
| Dimensions | 19.4 x 6.5 x 14.4 inches |
To Next Page
