How to resolve over-voltage protection (PV output) on Bluetti EB240?
If your Bluetti Portable Generator indicates over-voltage protection for the PV output, disconnect the solar charging cable, restart the machine, and then re-insert the solar charging cable.
What to do if Bluetti EB240 Portable Generator shows under-voltage protection (battery pack)?
If your Bluetti Portable Generator is showing an under-voltage protection error with the battery pack, charge the product in time and restart the machine once it is fully charged.
What to do if my Bluetti EB240 Portable Generator shows battery failure?
If your Bluetti Portable Generator indicates a battery failure, restart the machine and charge it.
What to do if the heat sink of inverter is overheated in Bluetti Portable Generator?
If the heat sink of the inverter in your Bluetti Portable Generator is overheated, wait for it to cool down and then restart the machine.
Why is my Bluetti Portable Generator showing over-temperature protection of heat sink for PV module?
If your Bluetti Portable Generator shows over-temperature protection of the heat sink for the PV module because the heat sink overheats, wait for it to cool down and then charge it.
Explains the meaning of charging power, DC/AC ON/OFF status, and battery status indicator on the screen.
Provides essential warnings regarding reading the manual, using warning labels, avoiding water, heat sources, and unauthorized modifications.
Provides key operational advice on environment requirements, air inlet/outlet, powering off when idle, and full charging for long periods.
Provides a table of error codes (E001-E004) and their corresponding problems and solutions, covering protections and failures.
Lists additional error codes (E005-E019) and their solutions, focusing on temperature, voltage, and inverter faults.
Details further error codes (E020-E023) and solutions related to temperature detection, charging, and power protection.
Details specifications for continuous output voltage, rated frequency, power, power factor, THDV, overload protection, and efficiency.
Details battery specifications like voltage, capacity, cell type, packing, IP rating, operating environment, dimensions, and net weight.
General| Battery Capacity | 2400Wh |
|---|---|
| Battery Type | LiFePO4 |
| Rated Power | 1000W |
| Surge Power | 1200W |
| Cycle Life | 2500+ cycles to 80% capacity |
| AC Output Voltage | 110V |
| AC Output Frequency | 60Hz |
| Car Port Output | 12V/9A |
| USB Output | 4 x USB-A (5V/3A) |
| DC Output | 12V/9A |
| Weight | 22 kg (48.5 lbs) |
| Solar Input | 16-60V/ 10A, Max.500W |
| Dimensions | 19.4 x 6.5 x 14.4 inches |
To Next Page
