To Next Page
N
Nicholas SmithAug 25, 2025
How to fix battery protection on Bluetti Portable Generator?
- LLinda PachecoAug 26, 2025
If your Bluetti Portable Generator is experiencing battery protection, disconnect the solar charging cable and restart the machine.
How to fix battery protection on Bluetti Portable Generator?
If your Bluetti Portable Generator is experiencing battery protection, disconnect the solar charging cable and restart the machine.
What to do for battery failure on Bluetti Portable Generator?
If your Bluetti Portable Generator indicates a battery failure, restart the machine and charge it.
What to do if Bluetti EB240 Portable Generator shows under-voltage protection for the 1st cell?
If your Bluetti Portable Generator indicates under-voltage protection for the 1st cell, charge the product in time and restart it when fully charged.
What to do if Bluetti EB240 Portable Generator shows under-voltage protection for the 2nd cell?
If your Bluetti Portable Generator indicates under-voltage protection for the 2nd cell, charge the product in time and restart it when fully charged.
What to do if Bluetti Portable Generator shows under-voltage protection for the 3rd cell?
If your Bluetti Portable Generator indicates under-voltage protection for the 3rd cell, charge the product in time and restart it when fully charged.
What to do if Bluetti Portable Generator shows under-voltage protection for the 4th cell?
If your Bluetti Portable Generator indicates under-voltage protection for the 4th cell, charge the product in time and restart it when fully charged.
What to do if the output port of inverter is short-circuited in Bluetti EB240 Portable Generator?
If the output port of the inverter on your Bluetti Portable Generator is short-circuited, check the output port. Turn off and then on the AC output to restore normal operation.
What to do if my Bluetti Portable Generator shows an overload protection of inverter?
If your Bluetti Portable Generator shows an overload protection error for the inverter, check whether the output port of the inverter is overloaded. Turn off and then on the AC output to recover.
What causes over-power protection (system) in Bluetti EB240 Portable Generator and how to fix it?
If your Bluetti Portable Generator is experiencing over-power protection, check whether the total output power is overloaded and restart the machine.
What to do for over-voltage protection (battery pack) in Bluetti Portable Generator?
If your Bluetti Portable Generator is showing an over-voltage protection error for the battery pack, stop charging it and start discharging.
Explains the meaning of charging power, DC/AC ON/OFF status, and battery status indicator on the screen.
Provides essential warnings regarding reading the manual, using warning labels, avoiding water, heat sources, and unauthorized modifications.
Provides key operational advice on environment requirements, air inlet/outlet, powering off when idle, and full charging for long periods.
Provides a table of error codes (E001-E004) and their corresponding problems and solutions, covering protections and failures.
Lists additional error codes (E005-E019) and their solutions, focusing on temperature, voltage, and inverter faults.
Details further error codes (E020-E023) and solutions related to temperature detection, charging, and power protection.
Details specifications for continuous output voltage, rated frequency, power, power factor, THDV, overload protection, and efficiency.
Details battery specifications like voltage, capacity, cell type, packing, IP rating, operating environment, dimensions, and net weight.
General| Battery Capacity | 2400Wh |
|---|---|
| Battery Type | LiFePO4 |
| Rated Power | 1000W |
| Surge Power | 1200W |
| Cycle Life | 2500+ cycles to 80% capacity |
| AC Output Voltage | 110V |
| AC Output Frequency | 60Hz |
| Car Port Output | 12V/9A |
| USB Output | 4 x USB-A (5V/3A) |
| DC Output | 12V/9A |
| Weight | 22 kg (48.5 lbs) |
| Solar Input | 16-60V/ 10A, Max.500W |
| Dimensions | 19.4 x 6.5 x 14.4 inches |
