What to do if Bluetti EP900 Storage shows 'BMS Communication Interrupted'?
If the Bluetti storage displays a 'BMS Communication Interrupted' error, verify that the external communication terminals are correctly connected and then restart the device. If the problem continues, contact the BLUETTI support team.
Details crucial safety guidelines for operating, installing, and maintaining the EP900 system.
Outlines essential general safety precautions to ensure safe operation of the EP900 energy storage system.
Provides critical safety instructions specifically for the EP900's battery pack, covering handling and operation.
Covers personal safety measures and required protective equipment for users during system operation.
Specifies the necessary requirements and precautions for safely installing the EP900 battery pack.
Details immediate safety actions and precautions to be taken in the event of a fire involving the system.
Provides emergency procedures and safety advice if the battery pack is dropped or severely impacted.
Provides step-by-step instructions for safely powering on the EP900 energy storage system.
Provides step-by-step instructions for safely powering off the EP900 energy storage system.
General| Nominal Voltage | 51.2V |
|---|---|
| Output Voltage | 120V/240V |
| Warranty | 10 Years |
| Battery Type | LiFePO4 |
| Inverter Power | 9, 000W |
| Solar Input | 150-500V |
| Cycle Life | 3, 500+ Cycles to 80% Original Capacity |
To Next Page
