© BlueView Technologies Corp BlueView BV5000 User Handbook
32
pan angle is -180, and a 360 degree total scan angle is also selected, the scan will
not be centered at -180, but will scan 360 degrees from -180 to 180 degrees.
File Controls
When conducting Spherical Scans the combined Merged File Name can be
assigned in the Scan Setup dialog box. This file name overrides the default name.
Position and Orientation Input
If the orientation and position of the BV5000 unit are known, that data can be
entered in the Scan Setup dialog box. The exported point could files are adjusted
such that the Z axis normal to the earth’s surface and the X axis is oriented north.
To Next Page
Loading...