Bluewheel HX360 User Manual

36
DEVICE COMPONENTS
1. Foot pad
2. Indicator lights
3. Front lights
4. Brake lights
5. Power button
6. Charging port
Front view
Rear view
TURN ON
Switch the device on using the power button. This is located at the back of the
hoverboard. The indicator lights show the operational readiness.
RESET TO DEFAULT
1. Place the hoverboard on a flat surface so that the wheels have no contact
with the ground.
2. Press the power button for 3-5 seconds until the warning lights flash.
3. Turn the hoverboard off and on again

Bluewheel HX360 Specifications

General

Brand	Bluewheel
Model	HX360
Category	Scooter
Language	English