BLUM SERVO-DRIVE uno - Disposal of Electrical and Electronic Appliances; Compliance with WEEE Directive; Return and Recycling Information; Disposal of Batteries

13
B
1
3
2
4
EN
Carrying out reference run
The drive unit recognises the required parameters using the refe-
rence run�
Reference run is required: LED flashes
Press on front: the reference run starts automatically
Close the front manually
Front opens and closes twice automatically: under no circumstances
should you try to manually interrupt or stop the procedure�
Operation Lights up continuously Flashes
NOTE
If the reference run is interrupted, it should be reset – see Reset
Motion E 1� Restart reference run�