BLUM SERVO-DRIVE uno - Safety Information; Accessibility of Mains Plug and Transformer; Transformer and Cabling Placement; Appliance Usage by Children and Persons with Disabilities

4
Safety
SERVO-DRIVE complies with current safety standards�
Nevertheless, there are certain risk factors if these installation instruc-
tions are not followed� Please be aware that Julius Blum GmbH is not
responsible for incidental or consequential damages that may arise if
these installation instructions are not followed�
• All national standards must be followed for SERVO-DRIVE assem-
bly� This includes, in particular, those related to the mechanical
safety of moving parts and electrical cabling�
• Only qualified technicians may install and replace Blum compon-
ents, modify the position of the Blum plug-in transformer or modify
any cabling�
• The device may only be connected to a power supply, the voltage,
type of power and frequency of which correspond to those listed on
the rating plate (see Blum plug-in transformer)�
• The outlet must be freely accessible�