14
C
1
3
2
4
5
Activating synchronisation
Up to three drive units can be synchronised allowing them to move
simultaneously� This function is required for several cabinets with a
uniform front�
Activating the SERVO-DRIVE switch → see A 1–3�
Press the <SYNC> button for the first drive unit
until the LED display flashes green�
Press the <SYNC> button for the second drive unit
until the LED displays for both synchronised drive units light up green
continuously�
Repeat procedure C 2–3 for all additional drive units�
Carry out reference run → see B 1–4�
E-training Lights up continuously Flashes
If there is an activation error, reset the functions of all drive units →
see Reset Wireless F 1�
NOTE
Re-activate the SERVO-DRIVE switch, synchronisation and reference
run → see A 1–3, C 2–4 and B 1–4�
To Next Page
Loading...
