BLUM ZX-Speed User Manual

Mountingandcommissioning
©byBlum‐Novotest
17
322000010S|V1B|07/2017
 Probecontactwithadapterispre‐assembled,seeFig.4‐8.
1. Screwtheprobecontactwiththeadapterandthechipprotectionlightlyontotheprobe.
2. Pushthechipprotectionallthewayupwardssothatthelowerspannerflatisaccessible.
Mounttheadapterbyusingaflatwrench(M
d
=1.0Nm).
3. Move the chip protection downwards. Fix the chip protection with the set screws
(M
d
=0.5Nm).
4. Calibratethemeasuringsystembythecalibrationcycle.

BLUM ZX-Speed Specifications

General

Brand	BLUM
Model	ZX-Speed
Category	Measuring Instruments
Language	English