BLUM ZX-Speed - EC Declaration of Incorporation

ECDeclarationofIncorporation
322000010S|V1B|07/2017
26
©byBlum‐Novotest
11.ECDeclarationofIncorporation
acc.totheECMachineRegulations2006/42/ECintheeditionfrom17May.2006
Weherebyconfirmthatthesubsequen tlyfollowingcomponentsaredefinedfortheinstallation
intoothermachinesandthattheyareinaccordancewiththefollowingsafetyrequirementsof
theECregulations.
Commissioningisnotallowed untilit is ascertainedthat th
ema
chines,inwhich the compo‐
nentsareinstalled,areinaccordancewiththeECregulations2006/42/EC.
Therelevanttechnicalinformationiscompiledacc.toannexVIIpartBand,whereappropriate,
wewillsendtheinformationconcerningthecomponentstothedifferentcountries.Theindus‐
trialpropertyrightsofBlum‐NovotestGmb
Hwi
llremainunaffected.
Componentname 322010001
Probefortoolmeasurement
Safetyrequirements
2006/42/EC,AnnexI
1.5.1
Appliedstandards:
EC‐Regulations: 2004/108/EC
2006/95/EC
Appliedharmonizedstandards: EN61000‐6
EN60204‐1
ENISO12100
Appliednationalstandards: DINVDE0100
DINVDE0113
Authorisedrepresentativefortechnicalinformation: Blum‐NovotestGmbH
Kaufstr.14
88287Gruenkraut,Germany