NPA70DA USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 07
The NPA70DA features a Dante® Audio input as its only source input. The current source that is selected via Dante®
Controller will always be the source that is output via NPA70DA.
Dante® Controller soware is required in order to setup and configure the NPA70DA as well as control your Dante®
network. Audinate provide extensive training videos and documentation on their website. This can be found here:
http://www.audinate.com/products/soware/dante-controller
Upon connecting the NPA70DA to a compatible network, the Dante® Controller soware should automatically discover
the device. The NPA70DA will appear in the Dante® Controller with the name “NPA70DA”. On the “Routing” screen it is
possible to then create audio routing between Dante® transmitters and receivers within the same system.
Dante® Audio & Dante® Controller
To Next Page
Loading...