NPA70DA USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 09
Web-GUI Control
The NPA70DA features an in-built web-GUI for control and configuration of the unit. By default the device is set to
DHCP, however if a DHCP server (eg: network router) is not installed the device IP address will revert to below details:
Default Username: blustream Default Password: 1234 Default IP Address: 192.168.0.200
The device can also be accessed via its mDNS name which is defaulted to: http://NPA70DA.local/
The web-GUI supports multiple users along with multiple user permissions as follows:
Guest Account - This account does not require a user to login. The Guest account can only change sources for each
zone. Guest access can be changed by the Admin, limiting inputs or outputs as necessary. The Guest account can be
disabled.
User Accounts - User accounts can be utilised, each with individual login details. User accounts can be assigned
permissions to specific areas and functions. A User must log in to make use of these functions.
Admin Account - This account allows full access to all functions of the unit as well as assigning users with permissions
as required.
Login Page:
The Login Page allows a user or admin to login and access additional functionality within the web GUI.
Once a user is selected from the list it is required to enter the pasword for that user in order to sign in.
Please note: the first time the Admin logs into the web GUI, the default admin password will need to be changed. It is
important to record this password as there is no way to recover it in the event that it is forgotten.
To Next Page
Loading...