M1 Mini User Manual
31 / 32
WARNINGS!
• Portable RF communications equipment (including peripherals such as antenna cables and
external antennas) should be used no closer than 30 cm (12 inches) to any part of the M1 Mini,
including cables specified by the manufacturer. Otherwise, degradation of the performance of
this equipment could result. If you have to do so, the device should be observed to verify
normal operation.
• The use of accessories and power adapter other than those specified, with the exception of
cables sold by the manufacturer of the equipment or system as replacement parts for internal
components, may result in increased emissions or decreased immunity of the equipment or
system.
• The device may be interfered with by other equipment, even if that other equipment
complies with CISPR EMISSION requirements.
• During operation of the device, due to electrostatic interference, the following phenomena
may occur: (1) Temporary loss of function or degradation of performance, such as abnormal
screen display, etc. The device will recover to normal after being restarted; (2) Automatic
restart of the device. These phenomena will not affect the normal use of the device, and will
not cause permanent performance degradation or function loss of the device.
To Next Page
Loading...
