Luna
®
G3 APAP / Luna
®
G3 CPAP User Manual
30 / 49
Turn the Knob to choose between the two
time formats.
Set screen brightness by adjusting this option.
The backlight of the LCD screen can be set to
“Auto” or “On”. Turn the Knob to choose
between the two modes. If it is set to “Auto”, the
backlight will turn off automatically after 30
seconds of inactivity. If it is set to “On”, the
backlight will always be on.
Full Face;
Nasal;
Pillow; Other
There are three mask types available, Full Face
(full-face mask), Nasal (nasal mask), and Pillow
(nasal pillow mask). The default mask type is
“Nasal”, but the patient can choose other
suitable masks as well. When the user select
masks other than the above three types of
REACT HEALTH masks, the patient can identify
the masks as other.
Start the
Mask Fitting
Test
Test whether the mask is worn correctly,the
screen will display the “great” icon if it is
qualified, otherwise the screen will display the
“need to adjust” icon.
iCode provides access to the patient's
compliance data during a recent time period.
The iCode mode displays data in sequences of
numbers, and the iCode QR+ mode displays
data in two-dimensional codes.
Use Time displays how long has the device been
used by the patient. The use time can be
erased.
Reset the use time of the filter, tubing and mask.
30 days /
60 days /
180 days /
365 days
/Off
This function is used for setting filter reminder,
tube reminder and mask reminder. After
opening, can set the use time of filter, tube and
mask.
The default setting is “English”.
Displays related information of the device
(Model, SN, Version, ID). This is read-only and
cannot be edited.
To Next Page
Loading...
Need help?
General
