BMC REACTHEALTH Luna G3 APAP User Manual

Luna
®
G3 APAP / Luna
®
G3 CPAP User Manual
47 / 49
Recommended separation distances between RF wireless communications equipment
The device is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the device can help prevent
electromagnetic interference by maintaining a minimum distance between RF wireless
communications equipment and the device as recommended below, according to
the maximum output power of the communications equipment.
Frequency
(MHz)
Maximum
Power
(W)
Distance
IEC 60601
Test Level
Complianc
e Level
Electromagnetic
Environment - Guidance
385
1.8
0.3
27
27
RF wireless
communications
equipment should be
used no closer to any
part of the device,
including cables, than
the recommended
separation distance
calculated from the
equation applicable to
the frequency of the
transmitter.
Recommended
separation distance
Where p is the maximum
output power rating of
the transmitter in watts
(W) according to the
transmitter manufacturer
and d is the
recommended
separation distance in
meters (m).
Field strengths from fixed
RF transmitter, as
determined by an
electromagnetic site
survey, should be less
than the compliance
level in each frequency
range.
Interference may occur
in the vicinity of
equipment marked with
the following symbol:
450
2
0.3
28
28
710
0.2
0.3
9
9
745
780
810
2
0.3
28
28
870
930
1720
2
0.3
28
28
1845
1970
2450
2
0.3
28
28
5240
0.2
0.3
9
9
5500
5785
Note: These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.

BMC REACTHEALTH Luna G3 APAP Specifications

General

Brand	BMC
Model	REACTHEALTH Luna G3 APAP
Category	Respiratory Product
Language	English