BMT 932 - Page 44

OZONE MONITOR BMT 932 Manual, Rev. 02/2021
44
Cmd Meaning PC->932 932->PC
23 Set Low Alarm EMO-Mask 1
Assign Low Alarms to logical EMO 1, setting bits 0..5 assign Low
Alarms on channels 1..6 to this function
*23#byte *23#
24 Set High Alarm EMO-Mask 1
Assign High Alarms to logical EMO 1, setting bits 0..5 assign High
Alarms on channels 1..6 to this function
*24#byte *24#
25 Set Low Alarm EMO-Mask 2
Assign Low Alarms to logical EMO 2, setting bits 0..5 assign Low
Alarms on channels 1..6 to this function
*25#byte *25#
26 Set High Alarm EMO-Mask 2
Assign High Alarms to logical EMO 2, setting bits 0..5 assign High
Alarms on channels 1..6 to this function
*26#byte *26#
27 Set Low Alarm EMO-Mask 3
Assign Low Alarms to logical EMO 3, setting bits 0..5 assign Low
Alarms on channels 1..6 to this function
*27#byte *27#
28 Set High Alarm EMO-Mask 3
Assign High Alarms to logical EMO 2, setting bits 0..5 assign High
Alarms on channels 1..6 to this function
*28#byte *28#
29 Time?
hh,mm,ss
*29# *29#byte,byte,byte
30 Set Hour *30#byte *30#
31 Set Minute *31#byte *31#
32 Set Second *32#byte *32#
33 Date Format?
0: DD.MM.YY
1: MM/DD/YY
*33# *33#byte
34 Set Date Format
0: DD.MM.YY
1: MM/DD/YY
*34#byte *34#
35 Date?
DD,MM,YY
*35# *35#byte,byte,byte
36 Set Day *36#byte *36#
37 Set Month *37#byte *37#
38 Set Year (YY) *38#byte *38#
39 RS-232 Timed/Polled?
1: Timed
0: Polled
*39# *39#byte
40 Set RS-232 Timed/Polled
1: Timed
0: Polled
*40#byte *40#
41 RS-232-Interval? (if Timed)
byte. Seconds
*41# *41#byte
42 Set RS-232-Interval (wenn Timed)
byte. Seconds
*42#byte *42#
43 Set Analog Output (Simulation)
Range 0.0: 0 V/ 4mA... 1.0: 10V /20 mA
2.0: normal operation
*43#float *43#
46 Alarm Beep?
1: On
0: Off
*46# *46#byte