BMT 932 - Page 47

OZONE MONITOR BMT 932 Manual, Rev. 02/2021
47
Cmd Meaning PC->932 932->PC
110 Last Values Channel 1?
float: the last concentration measured on channel 1
*110#byte *110#float
111 Last Values Channel 2?
float: the last concentration measured on channel 2
*111#byte *111#float
112 Last Values Channel 3?
float: the last concentration measured on channel 3
*112#byte *112#float
113 Last Values Channel 4?
float: the last concentration measured on channel 4
*113#byte *113#float
114 Last Values Channel 5?
float: the last concentration measured on channel 5
*114#byte *114#float
115 Last Values Channel 6?
float: the last concentration measured on channel 6
*115#byte *115#float
116 Set High Alarm Limit 1 (High Limit > Low Limit!)
(retrieve concentration unit first)
*116#float *116#
117 Set High Alarm Limit 2 (High Limit > Low Limit!)
(retrieve concentration unit first)
*117#float *117#
118 Set High Alarm Limit 3 (High Limit > Low Limit!)
(retrieve concentration unit first)
*118#float *118#
119 Set High Alarm Limit 4 (High Limit > Low Limit!)
(retrieve concentration unit first)
*119#float *119#
120 Set High Alarm Limit 5 (High Limit > Low Limit!)
(retrieve concentration unit first)
*120#float *120#
121 Set High Alarm Limit 6 (High Limit > Low Limit!)
(retrieve concentration unit first)
*121#float *121#
122 Set Low Alarm Limit 1 (High Limit > Low Limit!)
(retrieve concentration unit first)
*122#float *122#
123 Set Low Alarm Limit 2 (High Limit > Low Limit!)
(retrieve concentration unit first)
*123#float *123#
124 Set Low Alarm Limit 3 (High Limit > Low Limit!)
(retrieve concentration unit first)
*124#float *124#
125 Set Low Alarm Limit 4 (High Limit > Low Limit!)
(retrieve concentration unit first)
*125#float *125#
126 Set Low Alarm Limit 5 (High Limit > Low Limit!)
(retrieve concentration unit first)
*126#float *126#
127 Set Low Alarm Limit 6 (High Limit > Low Limit!)
(retrieve concentration unit first)
*127#float *127#