What to do if the BMW 61 90 5 A1E 1B1 LED display is lit in red?
If the LED display on your BMW Wallbox is red, switch off the supply voltage using the mains isolator. Then, disconnect the vehicle connecting plug and switch the supply voltage back on. If the issue continues, contact your local dealer.
How to fix BMW Automobile Accessories LED display with no power supply?
If the LED display of your BMW Wallbox has no power, check the RCCB and circuit breaker and switch them on if necessary. If there is still no power, there may be an error on the BMW Wallbox, in that case, contact your local dealer.
Why is the BMW 61 90 5 A1E 1B1 charging cycle not starting?
The charging cycle for your BMW might not start for several reasons. The vehicle connection plug may not be correctly inserted; try removing and reconnecting it. The vehicle could be programmed to start charging later, or it might not require power currently, so check the vehicle status. The app connection might also be faulty.
General| Brand | BMW |
|---|---|
| Model | 61 90 5 A1E 1B1 |
| Category | Automobile Accessories |
| Language | English |
Details crucial safety precautions for installation, operation, and servicing the BMW Wallbox.
Specifies conditions and locations suitable for installing the BMW Wallbox.
Details electrical connection specifications, including circuit breaker settings.
Step-by-step instructions for mounting the Wallbox and its bracket to the wall.
Defines maximum charging current by setting DIP switches for various power outputs.
Configures access control for charging cycles, enabling or disabling app authorization.
Procedure to initiate charging using the app for authorization.
Procedure to stop charging when app authorization is enabled.
Procedure to initiate charging automatically when app authorization is disabled.
Procedure to stop charging when app authorization is disabled.
To Next Page
