What to do if the BMW 61 90 5 A1E 1B3 Automobile Accessories LED display is lit in red?
If the LED display on your BMW Wallbox is red, switch off the supply voltage using the mains isolator. Then, disconnect the vehicle connecting plug and switch the supply voltage back on. If the issue continues, contact your local dealer.
Why is the BMW Automobile Accessories charging cycle not starting?
The charging cycle for your BMW might not start for several reasons. The vehicle connection plug may not be correctly inserted; try removing and reconnecting it. The vehicle could be programmed to start charging later, or it might not require power currently, so check the vehicle status. The app connection might also be faulty.
How to fix BMW 61 90 5 A1E 1B3 LED display with no power supply?
If the LED display of your BMW Wallbox has no power, check the RCCB and circuit breaker and switch them on if necessary. If there is still no power, there may be an error on the BMW Wallbox, in that case, contact your local dealer.
General| Brand | BMW |
|---|---|
| Model | 61 90 5 A1E 1B3 |
| Category | Automobile Accessories |
| Language | English |
Provides crucial safety guidelines for installation and operation.
Guidance on selecting the appropriate Residual Current Circuit Breaker (RCCB).
Lists essential requirements for the installation process.
Illustrates the recommended spacing around the Wallbox during installation.
Step-by-step guide for physically installing the BMW Wallbox.
Guide to setting the DIP switches for the earth system.
Details how to configure power settings using DIP switches.
Shows configurations for different maximum rated currents via DIP switches.
Explains how to configure authorisation settings using DIP switches.
Instructions for connecting external energy meters for monitoring.
Provides steps for commissioning the BMW Wallbox after installation.
How to start charging with app-based access control.
Lists common problems and their corresponding solutions.
To Next Page
