BMW 65 12 0 137 916 User Manual

Retrofit / Installation kit No. 65 12 137 916 (others see cover sheet)
Installation Instructions No. 01 29 137 925 Issue date: 10.2001
BMW CD changer installation kit
BMW 3 Series Convertible (E 46/C)
Technical and electrical knowledge required
The installation time is 0.5 -2.0 hours but this may vary depending on the condition of the car
and the equipment in it.
Retrofit / Installation kit No. 65 12 0 137 916
65 12 0 137 917
Parts and Accessories
Installation Instructions

BMW 65 12 0 137 916 Specifications

General

Brand	BMW
Model	65 12 0 137 916
Category	Automobile Accessories
Language	English

Summary

Important Information for CD Changer Installation

Required Tools and Equipment

Lists necessary tools and equipment for the installation process.

Connection Diagram: Power Supply Cable A

For Cars with On-Board Monitor Radio

Illustrates power supply cable connections for cars with an on-board monitor.

For Cars Without On-Board Monitor Radio

Illustrates power supply cable connections for cars without an on-board monitor.

Connection Diagram: CD Changer Cables B and C

Cable B for Cars with On-Board Monitor Radio

Details cable B requirements for cars with an on-board monitor radio.

Install the CD Changer (Cars with On-Board Monitor Radio, Up to 9/01)

Connecting CD Changer Cable B to Radio

Install the CD Changer (Cars with On-Board Monitor Radio, From 9/01)

Power Supply Cable A Connection Details

Conditional Installation of CD Changer Cable B

Specifies when the CD changer connection cable B needs to be installed.

Connecting Adapter Cable D and Cable B

Connects shrink hose, plug casing D1, and socket casing (8) with specific contacts.

Install the CD Changer (Cars Without On-Board Monitor)

Power Supply Cable A Requirement

States when the power supply cable A installation is necessary for non-monitor cars.

CD Changer Connection Cable C Requirement

Specifies when the CD changer connection cable C needs to be installed.

Connecting Cable C to Radio

CD Changer Transport Screw Removal

Coding and Concluding Work

System Coding Information

States that the system is not diagnostics-capable and does not require coding.

Concluding Work Steps