Front brake-pad wear
limit
≥0.04 in (≥1 mm) (Only friction
material without carrier plate.
The wear markings (grooves)
must be clearly visible.)
If the wear indicators are no
longer clearly visible:
WARNING
Dropping below the minimum
pad thickness
Reduced braking action, damage
to the brake
In order to ensure the operat-
ing reliability of the brake sys-
tem, make sure that the brake
pads are not worn beyond their
minimum thickness.
Have brake pads replaced at
an authorized service facil-
ity, preferably an authorized
BMW Motorrad retailer.
BMW Motorrad recommends
only installing original brake
pads from BMW Motorrad.
Checking the rear brake
pad thickness
Park the Scooter, ensuring that
the ground is level and firm.
Conduct a visual inspection of
the brake pad thickness. Direc-
tion of view: from rear, looking
at brake pads 1.
10
140
z
Maintenance
https://www.motorcycle-manual.com/
To Next Page
Loading...
