Secure the brake line in the
holders 1.
Release the brake lever.
Retighten the screws 2 on the
left and right with the appropri-
ate torque.
Brake caliper on fork leg
24 lb/ft (32 Nm)
Remove adhesive tape from
wheel rim.
Note on removing the rear
wheel
Removing the rear wheel re-
quires technical knowledge and
special tools. If you are not sure
whether this work is within your
skill range, please contact a spe-
cialist workshop, preferably a
BMW Motorrad retailer.
Removing rear wheel
CAUTION
Hot engine or hot exhaust
system
Burn hazard
Let the engine and exhaust
system cool before beginning
work.
Place the Scooter on its center
stand, ensuring that the ground
is level and firm.
Remove screw 1.
Raise the trim for the
silencer 2.
Push the trim for the silencer 2
back and remove it.
Release the screw 3 of the
clamp 4.
10
150
z
Maintenance
https://www.motorcycle-manual.com/
To Next Page
