Repeatedly press button 1 until
the desired heating level ap-
pears in the display.
The grips have three-level heat-
ing. The third level is used for
heating of the grips quickly. It is
advisable to switch back to the
second or first level as soon as
the grips are warm. The follow-
ing displays are available:
100 % heating output
Approx. 60 % heater out-
put
Approx. 30 % heater out-
put
with Connectivity
OE
Repeatedly press button 1 until
the desired heating level ap-
pears in the display.
The grips have three-level heat-
ing. The third level is used for
fast heating of the grips; the
switch should then be switched
back to the second or first level.
The following displays are avail-
able:
100 % heating output
Approx. 60 % heater out-
put
Approx. 30 % heater out-
put
Seat heating
with seat heating
OE
Operating the rider's seat
heating
Start engine.
NOTICE
Seat heating can be activated
only when the engine is
running.
4
77
z
Operation
https://www.motorcycle-manual.com/
To Next Page
Loading...
