BMW C 400 X - Installing the front wheel

Do not actuate the brakes with
the brake caliper removed.
Remove the screws 2 of brake
calipers on left and right.
Push the brake pads 3 apart
slightly by turning the brake
caliper 4 against the brake
disc 5.
Carefully pull brake calipers
back and outward to remove
them from brake rotors.
Raise the front of the Scooter
until the front wheel rotates
freely, preferably using a
BMW Motorrad front wheel
stand.
Mount front wheel stand
( 136).
Remove screw 1.
Release the clamping bolt 2.
Release the clamping bolt 3.
Press the quick-release axle 4
inward slightly on the left side
for a better grip on the right
side.
Remove the quick-release
axle 4 while supporting the
wheel.
Roll front wheel forward to re-
move it.
10
147
z Maintenance
https://www.motorcycle-manual.com/