Select Mobile device and
confirm.
Select PAIR NEW MOBILE DE-
VICE and confirm.
Mobile end devices are searched
for.
During the Bluetooth pair-
ing, the Bluetooth symbol
flashes in the lower status line.
Visible mobile end devices are
displayed.
Select mobile end device and
confirm.
Follow the instructions on the
mobile end device.
Confirm that the codes match.
The connection is established
and the connection status is
updated.
If the connection cannot be es-
tablished, the troubleshooting
chart in the "Technical data"
chapter may provide assis-
tance. ( 182)
Telephone data will be trans-
ferred to the vehicle automati-
cally depending on the mobile
end device.
Telephone data ( 104)
If the phone book is not dis-
played, the troubleshooting
chart in the "Technical data"
chapter may provide assis-
tance. ( 183)
If the Bluetooth connection
does not work as expected,
the troubleshooting chart in the
"Technical data" chapter may
provide assistance. ( 183)
Connecting rider's and
passenger's helmets
Pairing Bluetooth ( 95).
Select Rider's helmet or
Passenger helm. and con-
firm.
Make communication system
of the helmet visible.
Select PAIR NEW RIDER'S
HELMET or PAIR NEW PAS-
SENG. HELMET and confirm.
Helmets are searched for.
During the Bluetooth pair-
ing, the Bluetooth symbol
flashes in the lower status line.
Visible helmets are displayed.
Select helmet and confirm.
The connection is established
and the connection status is
updated.
If the connection cannot be es-
tablished, the troubleshooting
chart in the "Technical data"
chapter may provide assis-
tance. ( 182)
If the Bluetooth connection
does not work as expected,
the troubleshooting chart in the
"Technical data" chapter may
provide assistance. ( 183)
5
96
z
TFT display
https://www.motorcycle-manual.com/
To Next Page
