BMW F48 - Introduction; Operation

F48�General�Vehicle�Electronics
8.�Wash/Wipe�System
71
8.1.�Introduction
The�following�wipe/wash�functions�are�possible�in�the�F48:
• Intermittent�wipes
• Continuous�wipe�in�interval�stage�1
• Continuous�wipe�in�interval�stage�2
• Flick�wipes
Other�equipment�for�the�F48:
• Washer�jet�heating�(standard�equipment)
• Automatic�mode�via�rain-light-solar-condensation�sensor�(SA�521)
8.2.�Operation
The�F48�has�a�newly�designed�wiper�lever.�The�rear�wiper�is�no�longer�activated�by�pressing�the
complete�wiper�lever,�but�using�a�rotary�switch.
F48�wash/wipe�switch
Index Explanation
1 Windscreen�wiper,�wiper�stages
2 Interval�setting�or�for�rain�sensor�(SA�521)�sensibility�setting
3 Rotary�switch�for�rear�window�wiper�function
4 Automatic�button,�for�rain�sensor�(SA�521)