The following values can be dis-
played:
Total distance covered 3
Tripmeter 1 (Trip I)
Tripmeter 2 (Trip II)
with tyre pressure monitoring
(RDC)
OE
Tyre pressures
Resetting tripmeter
Switch on the ignition.
Select the desired tripmeter.
Press and hold down button 2
until the tripmeter reading is
reset.
On-board computer
with on-board computer
OE
Selecting readings
Switch on the ignition.
Repeatedly press button 1 until
the reading shows the value
you want.
The following values can be dis-
played in panel 2:
Ambient temperature (°C)
4
43
z
Operation
To Next Page
Loading...
