Changing button
functions
Press button 1 and button 2
at the same time and hold
them down until the reading
changes.
FLASH (redline warning) ap-
pears, along with ON or OFF.
Press button 2.
LAP (Lap-Timer) and ON or
OFF appear.
Repeatedly press button 1 until
the reading shows the mode
you want.
ON: Stopwatch and odomet-
er operated by means of the
INFO button on the handlebar
fitting.
OFF: Stopwatch and odomet-
er operated by means of but-
ton 2 in the instrument panel.
To save the setting, press
button 1 and button 2 at
the same time and hold
them down until the reading
changes.
Redline warning
The redline warning indicates
that engine revolutions have
reached the rev. counter's red
segment. The anti-theft alarm
telltale light 1 flashes red to in-
dicate that the engine is red-
lining.
The signal remains active un-
til you shift up or reduce engine
speed. You can activate or deac-
tivate the redline warning.
Activating redline warning
Press button 1 and button 2
at the same time and hold
them down until the reading
changes.
FLASH (redline warning) ap-
pears, along with ON or OFF.
Repeatedly press button 1 until
the reading shows the mode
you want.
4
48
z
Operation
To Next Page
