G12�Driver�Assistance�Systems
23.�Active�Lane�Keeping�Assistant
150
23.3.�Blind�spot�detection
The�table�below�shows�an�overview�of�the�functional�characteristics�of�the�"Blind�spot�detection"�sub-
function:
Speed�range Warning�function Corrective�steering�intervention
70�-�210km/h
• Triggered�in�the
event�a�lane�change
that�could�result�in�a
collision�is�detected
by�the�lane�departure
warning�function.
The�associated
physical�warning�in
the�form�of�a�vibration
in�the�steering�wheel
using�an�unbalanced
actuator�is�issued
and�visual�warning
in�the�exterior�mirror
in�the�form�of�the
corresponding�warning
light.
• Corrective�steering
intervention�in�the�direction
of�the�available�space�on
the�roadway�when�lane
change�intention�is�made
and�neighboring�lane�is
obstructed
Prerequisites:
• Detected�lanes
• Sufficient�available�space�on
the�roadway
Further�information�can�be�found�in�the�system�descriptions�of�the�respective�sub-functions�(see
sections8-10).
The�active�lane�keeping�assistant�with�active�side�collision�protection�does�not�relieve�the�driver�of�his
overall�responsibility�for�driving�the�vehicle.�Due�to�the�system�limits�be�attentive�in�order�to�be�able�to
actively�intervene�at�any�time.�Otherwise,�there�is�a�risk�of�an�accident.