G12�Driver�Assistance�Systems
15.�Cameras
78
G12�side�protection�view�(additional�obstacle�markings)
More�information�on�the�side�protection�function�can�be�found�in�section�18.
15.3.3.�Door�opening�angle
When�the�vehicle�is�stopped�and�the�selector�lever�position�"P"�is�engaged,�the�maximum�opening
angle�of�the�doors�is�displayed�on�the�central�information�display.
If�there�is�an�obstacle�near�the�door�and�it�is�detected�by�the�side�protection,�this�is�marked�on�the
central�information�display.�The�obstacle�marking�display�only�points�out�objects�in�the�area�of
the�door.�It�is�not�possible�for�a�view�from�the�camera�systems�to�be�displayed,�as�the�door�area�is
simulated.�Therefore,�the�driver�is�only�informed�that�there�is�an�object�at�the�side�of�the�vehicle;�it�is
not�certain�that�the�door�will�definitely�collide�with�the�identified�object.�The�driver�must�judge�this�for
himself.