EasyManuals Logo

BMW K 1200 R User Manual

BMW K 1200 R
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
Install cap of oil filler neck 1
and turn it clockwise to close.
Install the seat ( 67)
Draining engine oil
Remove the seat ( 66)
Damage to the engine
can result if it is operated
without enough oil, but the same
also applies if the oil level is too
high.
Always make sure that the oil
level is correct.
Squeeze the retainer of trans-
parent tube 2 together on left
and right and pull the tube up
and out of the oil tank.
Pull the transparent tube down
out of the frame and drain the
engine oil into a suitable con-
tainer until the level is to spe-
cification.
Insert the transparent tube into
the oil tank and engage the
retainer.
Store or dispose of the excess
engine oil in an environmentally
compatible manner.
Install the seat ( 67)
Brake system, general
Reliability
A fully functional brake system is
a basic requirement for the road
safety of your motorcycle.
Do not ride the motorcycle if you
have any doubts about the de-
pendability of the brake system.
Under these circumstances have
the brake system checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Incorrect working practices
endanger the reliability of
the brakes.
Have all work on the brake sys-
tem performed by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Checking operation of
brakes
Pull the handbrake lever.
The pressure point must be
clearly perceptible.
Press the footbrake lever.
The pressure point must be
clearly perceptible.
8
101
z
Maintenance

Table of Contents

Other manuals for BMW K 1200 R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BMW K 1200 R and is the answer not in the manual?

BMW K 1200 R Specifications

General IconGeneral
Displacement1157 cc
Power163 hp (120 kW) at 10, 250 rpm
Transmission6-speed
Compression Ratio13.0:1
Fuel SystemElectronic fuel injection
Final DriveShaft drive
Front SuspensionBMW Motorrad Duolever
Engine TypeLiquid-cooled, 4-stroke in-line four-cylinder
Torque127 Nm at 8, 250 rpm
Fuel Capacity19 liters
Seat Height820 mm
Dry Weight217 kg
Bore x Stroke79 mm x 59 mm
Fuel TypeUnleaded
ClutchWet, multi-disc
Gearbox6-speed, constant mesh
FrameAluminum bridge-type frame
Rear SuspensionBMW Motorrad Paralever
Front Wheel Travel115 mm
Rear Wheel Travel135 mm
Front BrakeDual 320 mm discs, 4-piston calipers
Rear BrakeSingle 265 mm disc, 2-piston caliper
ABSOptional
Maximum SpeedOver 200 km/h

Related product manuals