short time when the drive-ready state has been
switched on.
The cooling function is switched on automati‐
cally in the AUTO program.
When the automatic air conditioning is in opera‐
tion, condensation develops which exits under‐
neath the vehicle.
Maximum cooling effect
Principle
When drive-ready state is switched on, the sys‐
tem is set to lowest temperature, optimum air
flow and recirculated-air mode.
General
The function is available at an outside tempera‐
ture above approximately 0 ℃/32 ℉ and when
the drive-ready state is switched on.
Switching on/off
Press the button.
The LED is illuminated when the sys‐
tem is switched on.
The air flows from the side nozzles for the upper
body area. Therefore open the side nozzles.
The air flow can be adapted when the pro‐
gramme is active on the driver side.
AUTO program
Principle
The air flow, air distribution and temperature are
automatically regulated.
Switching on/off
Press the button.
The LED is illuminated when the AUTO
program is switched on.
Depending on the selected temperature, inten‐
sity AUTO program and external influences, the
air is directed towards the windscreen, side win‐
dows, upper body, and into the footwell.
The cooling function, see page 257, is switched
on automatically in the AUTO program.
A condensation sensor also controls the pro‐
gramme so that window condensation is avoided
as much as possible.
The AUTO program is automatically switched off
when the air distribution is set manually.
Intensity
With the AUTO programme switched on, the in‐
tensity can be adjusted. This changes the auto‐
matic control for the air flow and air distribution.
Press left or right side of button: reduce
or increase intensity.
The selected intensity is shown on the display
for automatic air conditioning.
Automatic air recirculation
control AUC
Principle
Automatic air recirculation control AUC detects
pollutants in the outside air. The supply of out‐
side air is shut off and the interior air is recircula‐
ted.
General
When the system is activated, a sensor detects
pollutants in the outside air and controls the
shut-off automatically.
When the system is deactivated, outside air
flows into the interior continuously.
Continuous recirculated-air mode deteriorates
the air quality in the interior and condensation on
the windows increases.
Seite 258
CONTROLS
Air conditioning
258
Online Edition for Part no. 01402989787 - II/18
To Next Page
Loading...
