DI Diesel Engines M57/M67 - Common Rail Sec. 2 P.12
Course contents/Background material
Crankshaft
The crankshaft converts the linear stroke motion of the pistons
into rotary motion.
The following features apply both to the M57 and M67:
• Threaded connection on front end of crankshaft designed as
4-hole mounting (replaces central bolt)
• Thrust bearing designed as constructed bearing
M57-specific features
• Material C38 mod.
• Bearing surfaces and radii inductively hardened
Main bearings (as on M47)
• Thrust bearing arranged between cylinders 5 and 6
• RPM signal taken from last crankshaft web, incremental wheel
screwed on crankshaft web
1 2
3
Forward direction
1 - Cylinder 1
2 - Cylinder 6
3 - Incremental wheel
KT-3678
Fig. 20: Crankshaft drive - view M57
© BMW AG, Service Training
To Next Page
Loading...
