Need help?Do you have a question about the BMW R 1250GS Adventure and is the answer not in the manual?
General| Displacement | 1, 254 cc |
|---|---|
| Front Suspension | BMW Motorrad Telelever; stanchion diameter 37 mm, central spring strut |
| Tire, Front | 120/70 R19 |
| Tire, Rear | 170/60 R17 |
| Bore x Stroke | 102.5 mm x 76 mm |
| Compression Ratio | 12.5:1 |
| Fuel System | Electronic fuel injection |
| Max Power | 136 hp at 7, 750 rpm |
| Max Torque | 143 Nm at 6, 250 rpm |
| Transmission | 6-speed |
| Fuel Capacity | 30 liters |
| Seat Height | 890 / 910 mm (adjustable) |
| Curb Weight | 268 kg |
| Rear Suspension | BMW Motorrad Paralever; cast aluminum single-sided swing arm with WAD strut (weight-related damping) |
| Fuel consumption | 4.75 l/100 km |
| Fuel type | Premium unleaded |
| Front Brake | Dual 305 mm discs, 4-piston calipers |
| Rear Brake | Single disc brake, diameter 276 mm, 2-piston floating caliper |
| ABS | BMW Motorrad Integral ABS |
| Length | 2, 270 mm |
| Width | 980 mm |
| Dry Weight | 249 kg (549 lbs) |
| Clutch | Wet clutch with anti-hopping function, hydraulically actuated |
| Frame | Two-section frame |
| Engine Type | Air/liquid-cooled flat twin (Boxer) |
Identification and layout of the motorcycle's instrument cluster.
Explanation of various indicator and warning lights on the instrument cluster.
Detailed explanation of various warning lights and their meanings.
Using the navigation system: destination entry and route guidance.
Rear wheel spring preload adjustment.
Rear wheel damping adjustment.
Rider safety information and required gear.
Engine starting procedure and Pre-Ride-Check.
Fuel specifications and refueling process.
Detailed explanation of the Antilock Braking System (ABS).
Detailed explanation of the Dynamic Traction Control (DTC) system.
Detailed explanation of the Dynamic ESA system.
Influence of riding modes on system settings.
Detailed explanation of the Dynamic Brake Control system.
Detailed explanation of the Tire Pressure Control (TPC/RDC) system.
Detailed explanation of the Hill Start Control system.
Engine oil level check and topping up procedures.
Brake system operation check and pad thickness inspection.
Instructions and warnings for motorcycle jump-starting.
Battery maintenance instructions, including charging procedures.
Installation and operation of the navigation system.
Engine specifications: location, type, design, and displacement.
Front and rear brake specifications: pad material and disk thickness.
BMW Motorrad's global service network and retailer capabilities.
To Next Page