BMW S 1000XR 2018 User Manual

Topping up coolant
Open cap 1 of expansion tank.
Add coolant up to specified
level. To do this, use a funnel
with a filler neck or hose.
Checking coolant level
( 134).
Close cap of expansion tank.
Tires
Checking tire pressure
WARNING
Incorrect tire inflation pres-
sure
Poorer handling characteristic
of motorcycle, reduction of tire
service life
Ensure proper tire inflation
pressure.
WARNING
Valve inserts open of their
own accord at high speeds
Sudden loss of tire inflation pres-
sure
Use valve caps with rubber
sealing ring and screw on
firmly.
Park motorcycle, ensuring that
support surface is firm and
level.
Check tire pressures against
data below.
Tire pressure, front
36.3 psi (2.5 bar)
Tire pressure, rear
42.1 psi (2.9 bar)
If tire pressure is too low:
Correct tire pressure.
Wheel rims and tires
Checking wheel rims
Park motorcycle, ensuring that
support surface is firm and
level.
Subject wheel rims to visual
inspection for defects.
Have damaged rims checked
and, if necessary, replaced
by a specialist service facil-
ity, preferably an authorized
BMW Motorrad retailer.
9
135
z Maintenance

BMW S 1000XR 2018 Specifications

General

Displacement	999 cc
Transmission	6-speed
Tires Front	120/70 ZR 17
Tires Rear	190/55 ZR 17
Engine Type	Liquid-cooled 4-stroke in-line four-cylinder engine
Max Power	165 hp at 11, 000 rpm
Max Torque	114 Nm at 9, 250 rpm
Front Suspension	Upside-down telescopic fork, 46 mm diameter
Rear Suspension	Aluminum 2-sided swing arm, adjustable rebound damping
Front Brakes	Twin disc, 320 mm, 4-piston radial calipers
Rear Brakes	Single 265 mm disc, single-piston caliper
ABS	BMW Motorrad ABS
Fuel Capacity	20 liters
Seat Height	840 mm
Weight	228 kg
Length	2, 183 mm
Width	940 mm
Height	1, 408 mm
Frame	Aluminum bridge type