Potential Problem Solution
If one earbud is not working Perform the Factory Reset
If earbuds are not in connection/scan mode Perform the Factory Reset
If earbuds disconnect during phone call Charge the earbuds or perform the Factory Reset
If there are other exceptions in usage
Place the earbuds back into the charging case and try
using the gain or perform the Factory Reset
Specifications
Bluetooth Version V5.0
Water Resistance IPX5
Music Playtime Up to 5 Hours
Standby Time 150 Hours
Transmission Range 10m
Driver Size 6mm
Bluetooth Profile HFP, HSP, SPP, AVRCP, A2D
Frequency 20Hz-20kHz
Batter Earbuds 40mAh ‘2
Battery Charging Case 420mAh
Charging Time 1 Hour
Earbuds’Weight 442g
Charging Case Weight 41g
Warning
Please follow the instructions to operate
Please charge the ear-buds according to the charging norms as mentioed on the packing & manual.
Please don’t use the ear-buds in extreme temperature
Please don’t water use the product near water
Please keep the product away form heat source as the heat may damage it
Don’t jam the ports such as charger port, LED port, etc. maximum volume in order to protect hearing and extend
the ear-buds serviceslife
Advisable
The earbuds start at a 100% volume and it may need to be reduced when the earbuds are switch on at first .This can
be done by using the volume control on the phone/media device.
Charging norms & Precautionary Guidelines
1. Charging /Brick/Adapter: 5V/2A
2. Cable/Wire: Standard Cable (35 Stands @0.10 mm diameter/strand)
Any other accessory can be paired up with the product as long as the specifications are as per above norms.
File Downloads
To Next Page
Loading...
