EasyManua.ls Logo

Bobcat 2200 - DAILY SERVICE TASKS; MONTHLY SERVICE TASKS; ADJUSTMENT INTERVALS; SEMIANNUAL SERVICE TASKS

Bobcat 2200
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Periodic Service Schedule
Bobcat 2200 Gasoline and Diesel Vehicle Operation & Maintenance Manual Page 31
PERIODIC SERVICE SCHEDULE
REGULAR INTERVAL SERVICE
Daily service by owner
or trained technician
Engine
Check engine oil level; add if necessary.
See Engine Oil Level Check on
page 35.
Diesel vehicles: Check engine coolant;
add if necessary. See Engine Coolant
Level Check on page 41.
Fuel filters
Diesel vehicles: Drain water from fuel
filter. See Draining Water from Fuel
Filter on page 44.
Brakes
Check brake fluid; add if necessary.
Check brake pedal for proper operation.
See Performance Inspection on page 20.
Monthly service by owner
or trained technician
Engine
Check engine circulating air passage;
visually inspect unshrouded area around
engine exhaust for grass and debris and
clean if necessary.
Diesel vehicles: Check for grass and
debris around the radiator.
Tires
Check air pressure and adjust if
necessary. See Vehicle Specifications
on page 48.
Transmission and differentials
Check lubricant levels. Add if necessary.
See Lubrication Level Check for Front
Differential, Transmission, and Rear
Differential on page 40.
General vehicle
Wash engine compartment and underside
of vehicle. Do not wash engine when hot.
FIrst adjustment after 20 hours, addi-
tional every 100 hours of operation
Engine
Gasoline vehicles: Adjust valve
clearance. See Honda GX620 Service
Manual (CCI P/N 102615401).
Semiannual service by trained
technician only
(or every 50 hours of operation,
whichever comes first)
Battery
Clean terminals and wash dirt from
casing; check electrolyte level. Add
distilled water if necessary. See page 45.
Front wheel alignment and toe-in
Check and adjust if necessary. See
Section 7 – Steering and Front
Suspension in the maintenance and
service manual.
Electrical wiring and connections Check for tightness and damage.
Brake system
Inspect master cylinder, brake lines, and
hoses for damage or leakage.
Check park brake cables for damage;
replace if necessary.
Check brake pads and discs; replace if
necessary. See Section 6 – Brake
System in the maintenance and service
manual.
Periodic Service Schedule continued on next page...

Table of Contents