6 STORAGE AND DISPOSAL
6.1 Storage
Use the procedure below to store the pump.
1. Shut-down the pump as described in Section 4.
2. Isolate the pump from the electrical supply and disconnect it from the vacuum system.
3. Place protective covers over the inlet and outlet-flanges.
4. Store the pump in cool, dry conditions until required for use. When required, prepare and
install the pump as described in Section 3.
6.2 Disposal
Dispose of the pump and any components safely in accordance with all local and national safety
and environmental requirements. Take particular care with components which have been
contaminated with dangerous process substances.
7 SPARES AND ACCESSORIES
7.1 Introduction
Edwards products, spares and accessories are available from Edwards companies in Belgium,
Brazil, Canada, France, Germany, Hong Kong, Italy, Japan, Korea, Switzerland, United
Kingdom, U.S.A and a worldwide network of distributors. The majority of these centres employ
Service Engineers who have undergone comprehensive Edwards training courses.
Order spare parts and accessories from your nearest Edwards company or distributor. When
you order, state for each part required:
• Model and Item Number of your equipment
• Serial number (shown on the rating plate)
• Item Number and description of part.
7.2 Accessories
Accessory Item Number
Vibration isolators (pack of 4) A248-01-404
24 ESDP12 and ESDP30 Scroll Pumps
To Previous Page
Loading...
