5
The nursing care bed is not suitable for use in hospitals. It is also not designed to transport
patients. The beds can only be moved within the patient's room - even during patient
positioning - for cleaning or better access to the patient, for example.
Attention: The beds come with no special connection options for a potential equalisation.
Electrical medical devices connected to the patient intravascular or intracardiac may not
be used. The operator of the medical products has to ensure that the combination of the
equipment meets the requirements of EN 60601-1.
This user manual contains safety instructions. All persons working with the beds must
be acquainted with the contents of these instructions. Improper operation can result in
personal injuries.
1.2 Definition of person groups
Operator
Operators (e.g. medical supply stores, specialist dealers, facilities and cost units) include
all physical or juridical persons, who use the beds or have the beds used for medical pur-
poses. The briefing on the use of the product shall generally be conducted by the operator.
User
Users are persons whose training, experience or briefing on the product allows them to
operate the nursing care bed or carry out works on it. The user is able to recognize possible
hazards and/or to avoid them and to assess the health condition of the patient.
Patient/resident
Persons in need of care as well as disabled and fragile people who are lying in the nursing
care bed.
Qualified personnel
Employees of the operator are referred to as qualified personnel. They are entitled to
deliver the nursing care bed, assemble, dismantle and transport it, on the basis of their
training or instructions. Besides knowing how to operate, mount and demount the nursing
care bed, these persons must be instructed according to the guidelines concerning the
cleaning and disinfection of the nursing care bed.
To Next Page
Loading...