22
4.2 Model series domiflex
The domiflex model series, consisting of the domiflex, domiflex low, domiflex low 20/80,
domiflex low classic, domiflex 185 and adi.flex 220 models, has been specially designed to
meet the requirements of daily continuous use in home care. The above mentioned mod-
els provide a high degree of lying comfort for frail people, persons in the need of care and
people with disabilities, and support the optimal care through an easy operation at the
same time. The domiflex model series:
- is not suitable for hospital use.
- is not suitable for the patient transport. The beds must be only moved for clean-
ing purposes inside the patient’s room or to allow access to the patient.
- is suitable for persons in need of care (adults) with a body height of 146 cm or
more. The weight of the person may not exceed 135kg or 185kg or 220kg (de-
pending on the model, see Chapter 4.1) and must be more than 40kg. The body
mass index (BMI) must be greater than or equal to 17.
- under certain circumstances can be used (if necessary) for medical purposes with
other electric medical equipment (e.g. suction devices, ultrasonic humidifier,
food systems, anti-bedsore systems, oxygen concentrators and similar devices).
In this event, disable all bed functions for the duration of the application via the
integrated disabling function.
Attention: The bed has no special connection options for a potential equalisation. Electri-
cal medical devices connected to the patient intravascular or intracardiac may not be
used. The operator of the medical products has to ensure that the combination of the
equipment meets the requirements of EN 60601-1.
To Next Page
Loading...