10
2 General description of the functions
Construction design and function
Corrosion protection
The Hermann Bock GmbH nursing care beds are developed and constructed in such a way
that they can function long and safely. For this reason, all materials that may corrode are
protected accordingly. All metal parts are equipped with a surface protection. The steel
parts are either galvanised or stove-enamelled with a PES powder coating and the alumin-
ium profiles are anodised.
The lying surface with 4 function areas
The lying surface consists as standard of a slatted comfort frame (can alternatively be fit-
ted with aluminium slats or special suspension systems) and is divided into four functional
areas: Backrest, solid seat, upper and lower leg rest.
The comprehensive lying surface frame is welded from a steel tube. The steel tubes are
stove-enamelled with a PES-powder coating. The electric variable height adjustment of
the lying surface is carried out with protective low-voltage DC motors (29 to 35V), and
controlled with the smooth keys of the hand controller. The backrest can be adjusted elec-
trically. The leg part consists of a foot support that is divided into two parts. With a touch
of a button on the hand control, each individual position can be adjusted continuously. In
the event of a power failure, the back and leg sections can be lowered using a 9-volt bat-
tery.
To Next Page
Loading...