EasyManua.ls Logo

BODYMAX Walking Pad WP60 - Set-Up Place

BODYMAX Walking Pad WP60
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
WP60
1.4 Set-Up Place
WARNING
+ Do not place the equipment in main corridors or escape routes.
CAUTION
+ Make sure that there is a safety area behind the treadmill with a length of at least 2 m and a
width at least equal to the width of the treadmill.
+ The training room should be well ventilated during training and not be exposed to any
draughts.
+ Choose the place in which to set up the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment.
+ The set-up and mounting surface of the equipment should be at, loadable and solid.
ATTENTION
+ The device may only be used in one building, in suciently tempered and dry rooms
(ambient temperatures between 10°C and 35°C). The equipment should not be used
outdoors or in rooms with high humidity (over 70%) like swimming pools.
+ A oor protective mat/equipment underlay can help to protect high-quality oor coverings
(parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight
unevenness.