BOGBALLE M2 - Table of Contents

M2(W) / M3(W) / M6W
1
CONTENTS
SUBJECT
Page
OVERVIEW ……………………………………..
2
TECHNICAL SPECIFICATIONS ……………………………………..
3
STANDARD EQUIPMENT ……………………………………..
4
OPTIONAL EQUIPMENT ……………………………………..
4
MAINTENANCE AND CARE
Normal maintenance………………….. 5
Special maintenance……………………. 6
Lubrication………………………………. 7
Generally…………………………………. 7
Spreading vanes…………………………. 7
……………………………………..
5
GUARANTEE / RESPONSIBILITY ……………………………………..
8
GENERALLY ……………………………………..
8
SAFETY and PROTECTION AGAINST ACCIDENT ……………………………………..
8
SPREADING SYSTEM ……………………………………..
9
SETTING SYSTEM ……………………………………..
10
FUNCTION – How to do ……………………………………..
11
MACHINE SETTINGS / Normal and late application
PTO- speed…………………………… 13
TILT ANGLE…………………………….. 14
HEIGHT,
incl. late application….... 14
SETTING OF QUANTITY……………….. 16
VANE / SPREAD WIDHT…………….. 17
FUNCTION SPREADING VANE…….. 18
Trend SYSTEM…………………………… 19
……………………………………..
13
NORMAL spreading
Practical test………………………………. 21
Test with test trays……………………… 22
Examples of NORMAL spread patterns... 24
…………………………………..…
21
HEADLAND spreading TO BORDER
Practical test………………………………. 28
Test with test trays……………………… 28
Ex. of HEADLAND spread patterns….. 29
……………………………………..
26
HEADLAND spreading FROM BORDER
Ex. of HEADLAND spread patterns.. 31
……………………………………..
30
REDUCED SPREAD WIDTH …………………………………..…
32
TURNING AT THE HEADLANDS …………………………………..…
33
SPREADING ON NON-RECTANGULAR FIELDS ……………………………………..
34
CHECK THE TRACTOR – before use ……………………………………..
35
CHECK THE SPREADER – before use ……………………………………..
35
PRACTICAL HINTS ……………………………………..
36
M2W/M3W – special ……………………………………..
37
USE OF CALIBRATION RATE CHECK KIT
REST EMPTYING……………………….. 38
……………………………………..
38
EC-Declaration of Conformity ……………………………………..
43
PICTOGRAM ……………………………………..
44
NOTES ……………………………………..
45
NB ! Fitting instruction for different options – are supplied with the options.