M2(W) / M3(W) / M6W
4
STANDARD EQUIPMENT
The M() / M()W machine is from factory supplied with all necessary standard equipment.
• PTO shaft with free wheeling
• Headland spreading TO BORDER, Trend with manually reversible transmission.
• Agitators, Excentric free- and slow rotating.
• Screens to open, 2 units with cones.
• Closing of only one outlet, choose right or left.
• Reduction outlet for micro granules, without use of tools.
• System for late application, link pins can be mounted in 2 heights.
• Degree meter, for setting the tilt angle of the machine.
• Transmission, with reversible gear and friction clutch / overload coupling.
• Mud guards
• TREND shift
(only M2W, M3W and M6W)
• Traffic Lights
OPTIONAL EQUIPMENT
The following options can be supplied for the machine:
COMPONENT DESCRIPTION DIMENSION ART. NO.
Module, base
M2(W) 550 litres
240 x 125
cm
6920-01
Module, plus
M2(W) 450 litres
290 x 140
cm
6930-17
Module, plus
M() / M()W 750 litres
290 x 140
cm
6930-10
Hydraulic control M(), Incl. tube with valve
6381-01
Cable control M(), Only between 0 and 250 Kg/min.
6380-01
CALIBRATOR ZURF M(), Electric operating system
6386-01
TREND kit, FROM BORDER M() / M()W, fixtures FROM BORDER
6395-10
BORDER-kit,
Manual, DOUBLE SHIFT
M() / M()W, Fittings
TO and FROM BORDER
6395-20
TREND, SHIFT M2 / M3, Electric shift
6390-30
TREND, DOUBLE SHIFT M() / M()W, Electric shift
6395-40+30
Cable kit, HEADLAND spreading M(), Operation from drivers seat 280
cm
4690-28
do. M(), Operation from drivers seat 380
cm
4690-38
do. M(), Operation from drivers seat 480
cm
4690-48
Hydraulic motor M() / M()W, Incl. tubes and valves
6932-50
Hopper cover, base M2(W), Foldable w/full opening 240 x 125
cm
6921-45
Hopper cover, plus M() / M()W, Foldable w/full opening 290 x 140
cm
6931-45
Transport wheels M() / M()W, 4 Ø110 mm plastic wheels
6930-50
Connection system M(), +40% / -40%
6381-23
do. M()W, +40% / -40%
6381-29
Ladder
M2 / M2W
6932-70
Ladder Extension
M() / M()W, only with M-Trail
6932-85
Set of screens f/wide tyres
M2/ M2W
6930-90
M2-Trail M2(W), Chassis Kit
1800-55
M3-Trail M3(W), Chassis Kit
1830-03
Trend Vanes, complete M() / M()W, System E1-T (L/R) 12 – 18
metres
4650-12
do. M() / M()W, System E2-T (L/R) 20 – 24
metres
4650-20
do. M() / M()W, System E6-T (L/R) 28 – 36
metres
4650-28
do. M() / M()W, System E8-T (L/R) – 42
metres
4650-36
do. M() / M()W, System U1-T (L/R) 12 – 18
metres
4650-50
All BOGBALLE products are subject to a continuous development. Therefore the list might not always be up-to-date.
To Next Page
Loading...
