Boge S 101 - Part 1: General; Part 2: Product description; Part 3: Installation

Index
BOGE Operating instructions for S 40-2...S 341 / SF 40-2...SF 220 series screw compressors
Inhalt.pm6.5 - USA
Page III
Index
1.1 General safety instructions ......................................................... 1.1
Safety instructions for compressor operation ................................. 1.1
Safety instructions for maintenance and repair of the compressor. 1.2
Accident prevention regulations .....................................................1.2
1.2 Introduction .................................................................................. 1.4
Symbols used.................................................................................1.4
Symbols on the compressor ........................................................... 1.5
Intended use ..................................................................................1.7
Inadmissible use ............................................................................ 1.7
Transportation damage .................................................................. 1.8
Data on the type plate .................................................................... 1.8
Service ........................................................................................... 1.8
2.1 Technical data ..............................................................................2.1
Technical data S 40-2 to S 100-2, part 1 ........................................ 2.1
Technical data S 101 to S 341, part 1............................................. 2.2
Technical data S 40-2 to S 100-2, part 2 ........................................ 2.3
Technical data S 101 to S 341, part 2............................................. 2.4
Technical data SF 40-2 to SF 220, part 1 ....................................... 2.5
Technical data SF 40-2 to SF 220, part 2 ....................................... 2.6
2.2 Function description .................................................................... 2.7
Function principle of the air end ..................................................... 2.7
Air circuit ........................................................................................ 2.7
Oil circuit ........................................................................................2.8
2.3 Compressor control .....................................................................2.9
Supply pressure ............................................................................. 2.9
Operating states ............................................................................. 2.9
Operating modes............................................................................ 2.9
Short operating times .....................................................................2.9
2.4 Control devices .......................................................................... 2.10
Operating pressure transmitter.....................................................2.10
Proportional controller (option for S-series) .................................. 2.10
2.5 Safety and monitoring devices ................................................. 2.11
General ........................................................................................ 2.11
Safety temperature limiting device ............................................... 2.11
Safety valve .................................................................................. 2.11
Monitoring the drive and fan motor............................................... 2.11
Rotational direction monitoring ..................................................... 2.11
Safety pressure switch (option) .................................................... 2.11
System pressure build-up (option) ............................................... 2.11
Part 1:
General
Part 2:
Product description